Home > Thin Walled Spherical Pressure Vessel

Thin Walled Spherical Pressure Vessel

Pressure vessels, sometimes storage tanks, are containers designed to hold liquids or gases at a pressure that differ from the ambient pressure. They are used in a variety of applications, including chemical processing, oil and gas processing, power generation, and medical applications. Pressure vessels can be made from a variety of materials, including stainless steel, carbon steel. The design of pressure vessels must consider the pressure and temperature of the fluids, as well as other factors such as corrosion, fatigue, and creep to determine the wall thickness. Pressure vessels must be designed and manufactured in accordance with applicable codes and standards, such as GB Standard or ASME Standard. Types of pressure vessel equipment includes shell and tube heat exchanger

Related Youtube Videos

Certification

Certificate of Environment Management System

Manufacture License of Pressure Vessel 2019.

Member of ESCO Committee of China Energy Conservation Association

Certification

Industry Information

Features of fully welded plate heat exchangers

Fully welded plate heat exchanger, the entire plate bundle is made of special stainless steel, welded by argon arc welding, without any non-metallic materials for sealing, with high temperature resistance, pressure resistance and corrosion...
Pressure vessel: Shell assembly welding requirements

Shell assembly welding requirements 1、In the cylinder fabric, the length of the first cylinder section should be considered to be not less than 300mm. 2、When assembling, the cross welding seam should not be used. The length of the outer arc between...
Pressure vessel: pressure test of air pressure test

Test medium 1. Air pressure test medium should be dry, clean air, nitrogen or other inert gas. 2. The pressure vessel with flammable media in use must be thoroughly steam cleaned and replaced, otherwise it is prohibited to use air as a test medium....
Pressure vessel: pressure test of hydraulic test

General rules 1.The completed vessel should be pressure tested (hydraulic test or gas tightness test) or adds the gas tightness test according to the drawings. 2.The pressure test must use two identical and corrected pressure gauge. The range of the...